Convex triangular vs. cylindrical field of view: how does the shape of the FOV affect radiation dose?

OBJECTIVE: To compare the dosimetry between convex triangular fields of view (FOV) and similar dimension cylindrical FOVs of two cone-beam computed tomography (CBCT) models. METHODS: Optically stimulated luminescence dosimeters (OSLDs) were placed in fiducial anatomical locations in an anthropomorphic phantom representing an adult head male for dosimetry scans. Convex triangular FOVs (100 × 80 mm/maxilla-mandible; 100 × 50 mm mandible; 100 × 50 mm/maxilla) from Veraviewepocs 3D R100 (J. Morita, Kyoto, Japan) (R100) and Veraview® X800 (J. Morita, Kyoto, Japan) (X800) and cylindrical FOVs from R100 and X800 (80 × 80 mm/maxilla-mandible; 80 × 50 mm/mandible; 80 × 50 mm/maxilla) were obtained, resulting in 12 different scan protocols. Equivalent doses for each relevant organ/tissue and the effective dose for each protocol were calculated. Mean effective doses were compared by the two-way analysis of variance (ANOVA) with Tukey's post hoc test to evaluate the effect of the FOV and device (α = 0.05). RESULTS: The effective doses ranged between 69 and 324 µSv for the convex triangular FOVs and 76 and 332 µSv for the cylindrical FOVs. Convex triangular FOVs from the R100 device had effective doses 2.3 to 15.3% lower than their corresponding cylindrical FOVs with similar height (p < 0.05), and that difference ranged between 8.8 and 11.8% for the X800 device (p < 0.05). CONCLUSION: Convex triangular fields of view delivered slightly lower effective doses than the cylindrical fields of view of similar dimensions in the R100 and X800 CBCT devices. CLINICAL RELEVANCE: Understanding the influence of the image geometry formation in effective dose allows optimization to reduce patient dose.

Filtered back projection vs. iterative reconstruction for CBCT: effects on image noise and processing time.

OBJECTIVES: To assess the effect of standard filtered back projection (FBP) and iterative reconstruction (IR) methods on CBCT image noise and processing time (PT), acquired with various acquisition parameters with and without metal artefact reduction (MAR). METHODS: CBCT scans using the Midmark EIOS unit of a human mandible embedded in soft tissue equivalent material with and without the presence of an implant at mandibular first molar region were acquired at various acquisition settings (milliamperages [4mA-14mA], FOV [5 × 5, 6 × 8, 9 × 10 cm], and resolutions [low, standard, high] and reconstructed using standard FBP and IR, and with and without MAR. The processing time was recorded for each reconstruction. ImageJ was used to analyze specific axial images. Radial transaxial fiducial lines were created relative to the implant site. Standard deviations of the gray density values (image noise) were calculated at fixed distances on the fiducial lines on the buccal and lingual aspects at specific axial levels, and mean values for FBP and IR were compared using paired t-tests. Significance was defined as p < 0.05. RESULTS: The overall mean for image noise (± SD) for FBP was 198.65 ± 55.58 and 99.84 ± 16.28 for IR. IR significantly decreased image noise compared to FBP at all acquisition parameters (p < 0.05). Noise reduction among different scanning protocols ranged between 29.7% (5 × 5 cm FOV) and 58.1% (5mA). IR increased processing time by an average of 35.1 s. CONCLUSIONS: IR significantly reduces CBCT image noise compared to standard FBP without substantially increasing processing time.

Development and validation of a 3D anthropomorphic phantom for dental CBCT imaging research.

BACKGROUND: Optimization of dental cone beam computed tomography (CBCT) imaging is still in a preliminary stage and should be addressed using task-based methods. Dedicated models containing relevant clinical tasks for image quality studies have yet to be developed. PURPOSE: To present a methodology to develop and validate a virtual adult anthropomorphic voxel phantom for use in task-based image quality optimization studies in dental CBCT imaging research, focusing on root fracture (RF) detection tasks in the presence of metal artefacts. METHODS: The phantom was developed from a CBCT scan with an isotropic voxel size of 0.2 mm, from which the main dental structures, mandible and maxilla were segmented. The missing large anatomical structures, including the spine, skull and remaining soft tissues, were segmented from a lower resolution full skull scan. Anatomical abnormalities were absent in the areas of interest. Fine detailed dental structures, that could not be segmented due to the limited resolution and noise in the clinical data, were modelled using a-priori anatomical knowledge. Model resolution of the teeth was therefore increased to 0.05 mm. Models of RFs as well as dental restorations to create the artefacts, were developed, and could be inserted in the phantom in any desired configuration. Simulated CBCT images of the models were generated using a newly developed multi-resolution simulation framework that incorporated the geometry, beam quality, noise and spatial resolution characteristics of a real dental CBCT scanner. Ray-tracing and Monte Carlo techniques were used to create the projection images, which were reconstructed using the classical FDK algorithm. Validation of the models was assessed by measurements of different tooth lengths, the pulp volume and the mandible, and comparison with reference values. Additionally, the simulated images were used in a reader study in which two oral radiologists had to score the realism level of the model's normal anatomy, as well as the modelled RFs and restorations. RESULTS: A model of an adult head, as well as models of RFs and different types of dental restorations were created. Anatomical measurements were consistent with ranges reported in literature. For the tooth length measurements, the deviations from the mean reference values were less than 20%. In 77% of all the measurements, the deviations were within 10.1%. The pulp volumes, and mandible measurements were within one standard deviation of the reference values. Regarding the normal anatomy, both readers considered the realism level of the dental structures to be good. Background structures received a lower realism score due to the lack of detailed enough trabecular bone structure, which was expected but not the focus of this study. All modelled RFs were scored at least adequate by at least one of the readers, both in appearance and position. The realism level of the modelled restorations was considered to be good. CONCLUSIONS: A methodology was proposed to develop and validate an anthropomorphic voxel phantom for image quality optimization studies in dental CBCT imaging, with a main focus on RF detection tasks. The methodology can be extended further to create more models representative of the clinical population.

Does the shape of the field-of-view influence the magnitude of artefacts from high-density materials in cone-beam computed tomography?

OBJECTIVE: To compare cylindrical and convex triangular field-of-views (FOVs) concerning the magnitude of artefacts from high-density materials in cone-beam CT (CBCT). METHODS AND MATERIALS: Cylinders of amalgam, chromium-cobalt, titanium, and zirconia were individually placed in the anterior and posterior regions of a polymethylmethacrylate phantom and scanned using cylindrical and convex triangular FOVs of the Veraview X800 CBCT device. Using the Image J software, 15 square regions of interest (ROIs) were placed in the axial reconstruction around the middle level of the cylinder and at distances of 0.5, 1.0, and 1.5 cm from the centre of the cylinder. Mean grey value and standard deviation of each ROI were averaged for each distance and subtracted from the values of a control ROI to calculate the magnitude of the artefacts by the grey value mean difference (GVMD) and grey value standard deviation (GVSD). Multiway analysis of variance with Tukey post-hoc test with a significance level of 5% evaluated the effect of the shape of the FOV, position inside the FOV, high-density material, and the distance of the artefact from the material. RESULTS: The convex triangular FOV increased the GVSD for all materials in the anterior and posterior regions at 0.5 cm compared to the cylindrical FOV (p < 0.0001). The convex triangular FOV showed greater GVMD for chromium-cobalt and zirconium in the anterior region and all materials in the posterior region at all distances (p < 0.0001). CONCLUSION: The FOV shape influences the magnitude of artefacts from high-density materials. The convex triangular FOV showed greater artefact magnitude with variability among the high-density materials, region in the FOV, and distance from the material.

A novel method of objectively detecting tooth ankylosis using cone-beam computed tomography: A laboratory study.

Purpose: The aim of this study was to objectively detect simulated tooth ankylosis using a novel method involving cone-beam computed tomography (CBCT). Materials and Methods: Tooth ankylosis was simulated in single-rooted human permanent teeth, and CBCT scans were acquired at different current levels (5, 6.3, and 8 mA) and voxel sizes (0.08, 0.125, and 0.2). In axial reconstructions, a line of interest was perpendicularly placed over the periodontal ligament space of 21 ankylosed and 21 non-ankylosed regions, and the CBCT grey values of all voxels along the line of interest were plotted against their corresponding X-coordinates through a line graph to generate a profile. The image contrast was increased by 30% and 60% and the profile assessment was repeated. The internal area of the resulting parabolas was obtained from all images and compared between ankylosed and non-ankylosed regions under different contrast enhancement conditions, voxel sizes, and mA levels using multi-way analysis of variance with the Tukey post hoc test (α=0.05). Results: The internal area of the parabolas of all non-ankylosed regions was significantly higher than that of the ankylosed regions (P<0.05). Contrast enhancement led to a significantly greater internal area of the parabolas of non-ankylosed regions (P<0.05). Overall, voxel size and mA did not significantly influence the internal area of the parabolas (P>0.05). Conclusion: The proposed novel method revealed a relevant degree of applicability in the detection of simulated tooth ankylosis; increased image contrast led to greater detectability.

Monitoring cone-beam CT radiation dose levels in a University Hospital.

OBJECTIVE: To present patient dose levels for different CBCT scanners, acquired by a dose monitoring tool in a University Hospital, as a function of field of view (FOV), operation mode, and patient age. METHODS: An integrated dose monitoring tool was used to collect radiation exposure data [type of CBCT unit, dose-area product (DAP), FOV size, and operation mode] and patient demographic information (age, referral department) performed on a 3D Accuitomo 170 and a Newtom VGI EVO unit. Effective dose conversion factors were calculated and implemented into the dose monitoring system. For each CBCT unit, the frequency of examinations, clinical indications, and effective dose levels were obtained for different age and FOV groups, and operation modes. RESULTS: A total of 5163 CBCT examinations were analyzed. Surgical planning and follow-up were the most frequent clinical indications. For the standard operation mode, effective doses ranged from 35.1 to 300 µSv and 9.26-117 µSv using 3D Accuitomo 170 and Newtom VGI EVO, respectively. In general, effective doses decreased with increasing age and FOV size reduction. CONCLUSIONS: Effective dose levels varied notably between systems and operation modes.Operation mode selection and FOV size were indication-oriented, with larger FOV sizes election serving surgical planning and follow-up. Seeing the influence of FOV size on effective dose levels, manufacturers could be advised to move toward patient-specific collimation and dynamic FOV selection. Systematically monitoring patient doses could be recommended for steering future CBCT optimization.

Is the efficacy of cone beam computed tomography in the diagnosis of tooth ankylosis influenced by dose reduction protocols?

OBJECTIVE: To evaluate the diagnostic efficacy of cone beam computed tomography (CBCT) examinations acquired with varying dose protocols in the diagnosis of simulated tooth ankylosis (TA). STUDY DESIGN: Tooth ankylosis was simulated in 15 of 30 teeth, and CBCT examinations were acquired at 3 mA levels (8, 6.3, and 5) and 3 voxel sizes (0.08, 0.125, and 0.2 mm). Four radiologists independently assessed the presence of TA using a 5-point scale. Sensitivity, specificity, and area under the curve (AUC) obtained through receiver operating characteristic analysis were compared among mA levels and voxel sizes using two-way analysis of variance (α = 0.05). Intra- and interexaminer reliability levels were assessed with the weighted kappa examination. RESULTS: Sensitivity was low (0.32-0.49), and specificity was reasonably high (0.71-0.83). Mean values of AUC were low, ranging between 0.54 and 0.67, which reveals poor overall discrimination between health and disease. The detection of TA was not significantly influenced by mA level or voxel size (P > .05). Intra- and interexaminer agreements ranged from slight to moderate (0.160-0.535) and from fair to substantial (0.236-0.697), respectively. CONCLUSIONS: Despite the limited efficacy of CBCT for TA detection, when indicated as a complementary examination, mA reduction should be considered for dose optimization purposes.

What is the image appearance of juvenile idiopathic arthritis in MRI, CT, and CBCT of TMJ? A systematic review.

OBJECTIVE: We performed a systematic review to investigate the appearance of imaging signs on magnetic resonance imaging (MRI), cone-beam computed tomography (CBCT), and conventional computed tomography (CT) scans of the temporomandibular joints (TMJs) of patients with juvenile idiopathic arthritis (JIA). MATERIALS AND METHODS: We performed electronic searches of the PubMed, Embase, Web of Science, Scopus, Lilacs, and the Cochrane Library databases to identify studies investigating JIA and its related imaging findings. Inclusion criteria were as follows: original article studies based on humans and systematic reviews, studies enrolling patients under 18 years of age with a diagnostic of JIA, the use of International League of Associations for Rheumatology (ILAR) criteria and one type of medical imaging (MRI, CBCT, or CT), and papers published in the English language. RESULTS: A total of six studies met the inclusion criteria, four involving MRI and two involving CBCT. Additionally, all six studies analyzed the imaging findings of pathological TMJ affected by JIA. The results showed that synovial membrane enhancement, condylar erosions, and condylar flattening were the most prevalent imaging findings in JIA. CONCLUSION: MRI examinations are more specific for detecting anomalies in the TMJ than CBCT and CT. Additionally, these results must be correlated with clinical signs to verify the correct diagnosis. CLINICAL RELEVANCE: This study identified the most prevalent imaging signs of JIA to provide an early and correct diagnosis of the disease.

Does the angulation between the maxillary central incisors and the nasopalatine canal differ among sagittal and vertical skeletal patterns? A CBCT study.

OBJECTIVES: To assess the influence of sagittal and vertical skeletal patterns, and sex in the angulation and relationship between the maxillary central incisors and the nasopalatine canal. MATERIALS AND METHODS: Cone-beam computed tomography (CBCT) exams of 172 patients were classified into sagittal (class I, II, and III) and vertical skeletal patterns (mesofacial, brachyfacial and dolichofacial). Hard palate-nasopalatine canal and hard palate-long axis of maxillary central incisors angles were measured in sagittal reconstructions. The obtained angles were used to calculate the angulation between maxillary central incisors and nasopalatine canal by triangle geometric relationship. Analysis of variance (multi-way ANOVA) and Tukey post-hoc test were used for data analysis (α=5%). RESULTS: Sagittal and vertical skeletal patterns, and sex presented a low influence on the angulation of maxillary central incisors and nasopalatine canal. Dolichofacial class II women showed the greatest hard palate-nasopalatine canal angulations (P<0.05) and maxillary central incisors and nasopalatine canal angulations (P<0.05). Mesofacial class II and III men presented the lowest maxillary central incisors and nasopalatine canal angulations (P<0.05). CONCLUSIONS: The sagittal and vertical skeletal patterns, and sex have a low influence on the angulation of the maxillary central incisors and the nasopalatine canal.

Impact of COVID-19 pandemic on dental education: perception of professors and students / Impacto de la pandemia COVID-19 en educación dental: percepción de estudiantes y profesores

Abstract The objective of this study was to evaluate perception and feelings experienced by dentistry professors and students about distance learning during the COVID-19 pandemic. Fifty professors and fifty- two students reported the perceptions and implications of distance learning imposed by the pandemic of COVID-19. The participants' answers were analyzed using the qualitative-quantitative method of the collective subject's discourse. The answers were summarized in central ideas, distributed in absolute and relative frequency. The answers with similar central ideas were grouped, obtaining the discourse of the collective subject. The similar central ideas about distance learning addressed by professors and students were: suitable for didactic courses; limited laboratory and clinical courses, and internet access difficulties. Specifically for professors: a complement to classroom teaching; stress and learning with digital technologies; difficulty in reconciling classes with domestic activities; concerns with motivation and interaction with students; asynchronous lectures favor knowledge fixation, and synchronous lectures favor interaction with students; unreliable assessment methods; concern about returning to face-to-face classes. For the students: it was applied to all courses; demotivating; fundamental to guide studies; professors' commitment; long lectures; excessive school activities; difficult attendance control and evaluation; the comfort of being at home; impact on research. Professors considered distance learning as a learning opportunity on how to use digital technologies but too limited for lab and clinical activities and interaction with students. Students found it discouraging due to the absence of practical classes and excessive school activities.

Resumen: Evaluar la percepción y los sentimientos manifestados por profesores y estudiantes de odontología sobre la educación a distancia durante la pandemia por COVID-19. 50 profesores y 52 estudiantes informaron las percepciones e implicaciones del aprendizaje a distancia impuestas por motivo de la pandemia de COVID-19. Respuestas de los participantes fueron analizadas utilizando el método cualitativo-cuantitativo del discurso del sujeto colectivo. Respuestas se agruparon en ideas centrales, obteniendo el discurso del sujeto colectivo y fueron distribuidas en frecuencia absoluta y relativa. Ideas centrales similares entre profesores y estudiantes sobre el aprendizaje a distancia fueron: a) es adecuado para cursos didácticos; b) limitado para cursos de laboratorio y clínicos; c) presenta dificultades devido al acceso a Internet. Específicamente para profesores: a) complemento a la docencia en el aula; b) aumenta el estrés devido a la curva de aprendizaje con tecnologías digitales; c) dificultad para conciliar las clases con las actividades domésticas; d) preocupaciones con la motivación y la interacción con los estudiantes; e) las clases asincrónicas favorecen la fijación del conocimiento y las clases sincrónicas favorecen la interacción con los estudiantes; f) métodos de evaluación poco fiables; y g) preocupación por volver a las clases presenciales. Para los estudiantes: a) se aplicó a todos los cursos; b) desmotivador fundamental para orientar los estudios; c) compromiso de los profesores; d) conferencias largas; e) actividades escolares excesivas; f) difícil control y evaluación de asistencia; g) la comodidad de estar en casa; y h) impacto en la investigación. Profesores consideraron el aprendizaje a distancia como una oportunidad de aprendizaje sobre cómo utilizar las tecnologías digitales, pero demasiado limitado para las actividades de laboratorio y clínicas y la interacción con los estudiantes. Estudiantes lo encontraron desalentador debido a la ausencia de clases prácticas y al exceso de actividades escolares.

Imaging of the upper airway: which method is best for orthodontic assessment?

The objectives of the present study were to compare measurements of pharyngeal airway subregions on lateral cephalometric (LC) and cone beam computed tomographic (CBCT) images in relation to skeletal classes and discuss the advantages and disadvantages of these imaging formats for this type of assessment. The CBCT images were assessed via both multiplanar reconstruction (MPR) and 3-dimensional (3D) reconstruction. The LC and CBCT images from 107 patients were classified according to skeletal class: I, n = 35; II, n = 35; and III, n = 37. Linear measurements of the subdivisions of the upper airway were performed on the LC, MPR, and 3D images. In addition, area and volumetric measurements were performed on the MPR images. The relationships among imaging methods, skeletal class, and pharyngeal thirds were assessed by means of a 1-way analysis of variance (α = 0.05). No statistically significant differences in the linear, area, or volumetric measurements of the upper airway subregions were found among the skeletal classes (P > 0.05). For the linear measurements in the oropharynx and hypopharynx, greater values were observed for the LC images than for the MPR and 3D images (P ≤ 0.05). Based on the study findings, MPR images should be preferred for visualization of the pharyngeal airway subregions. However, LC imaging is preferable to 3D reconstruction.

Digital technology in dental education during COVID-19 pandemic: worldwide experience of professors and students / Tecnología digital en la educación odontológica durante la pandemia por COVID-19: experiencia mundial de profesores y estudiantes

ABSTRACT: The objective of this study was to assess the use and experience with digital communication tools among dentistry professors and students to adapt to distance learning during the Covid-19 pandemic. Nine hundread and ninety five participants (479 dentistry professors and 516 students) from countries in North America, Latin America, Brazil, Europe, Asia, Oceania, and the Middle East answered a questionnaire about motivation/stress/anxiety; practice with digital technologies; synchronous/asynchronous communication technologies (difficulties/benefits), and which ones would they prefer using when returning to college. Data were analyzed by the Chi-square test and Fisher's exact (α=0.05). Motivation was more affected among the female professors, male students, and Brazilians (p<0.05). Concern about the academic future, was higher among female students, up to 30 years old, from Latin America and Brazil, and lower for European professors (p<0.05). Anxiety and stress were higher for undergraduate students up to 20 years old from Latin America and Brazil (p<0.05). European professors used more synchronous videoconferencing services for lectures/questions, while Brazilians used more text messaging applications for answering questions (p<0.05). Latin American professors used more surveys for evaluation (p<0.05). Brazilian professors indicated that they would use "online meetings" and "survey administration services" when returning to face-to-face activities and European professors/students would use "email" (p<0.05). Professors from Asia/Oceania/Middle East and professors/students from Brazil indicated "remote activities were important for students not to be inactive" (p<0.05). Efforts were made to adapt Dentistry's teaching to distance learning during the COVID-19 pandemic. However, the technologies used for this, feelings, and experiences differed between professors and students.

RESUMEN: El objetivo de este estudio fue evaluar el uso y la experiencia con herramientas de comunicación digital entre profesores y estudiantes de odontología para adaptarse al aprendizaje a distancia durante la pandemia Covid-19. Novecientos noventa y cinco participantes (479 profesores y 516 estudiantes de odontología) de países de diferentes regiones de América del Norte, América Latina, Brasil, Europa, Asia, Oceanía y Oriente Medio respondieron un cuestionario sobre motivación/ estrés/ansiedad; práctica con tecnologías digitales; tecnologías de comunicación sincrónicas/asincrónicas (dificultades/beneficios), y cuáles continuarían usando al regresar a la universidad. Los datos se analizaron mediante las pruebas Chi-cuadrado y exacta de Fisher (α=0,05). La motivación se vio más afectada entre las profesoras, estudiantes y brasileños (p<0,05). La preocupación por el futuro académico fue mayor entre las estudiantes, hasta los 30 años, de América Latina y Brasil, y menor para el profesorado europeo (p<0,05). El estrés fue mayor para el estudiantado de pregrado de Latinoamérica y Brasil hasta los 20 años (p<0.05). El profesorado europeo utilizó más servicios de videoconferencia sincrónica para clases y consultas, mientras que el brasileño utilizó más aplicaciones de mensajería de texto para consultas (p<0,05). El profesorado latinoamericano utilizó más encuestas para evaluación (p<0.05). El profesorado brasileño indicó que utilizaría "reuniones en línea" y "servicios de encuestas" cuando regresaran a la presencialidad, mientras que el profesorado/ estudiantado europeo utilizaría "correo electrónico" (p<0,05). El profesorado de Asia/ Oceanía/Medio Oriente y profesorado/estudiantado de Brasil indicó que "las actividades remotas eran importantes para que el estudiantado no estuviera inactivo" (p<0,05). Se relizaron esfuerzos para adaptar la enseñanza de la Odontología al aprendizaje a distancia durante la pandemia de COVID-19. Sin embargo, las tecnologías utilizadas y las experiencias difirieron entre profesores y estudiantes.

Can the Incorporation of a Lead Foil on the Backside of Digital Receptors Produce a Better Endodontic Diagnosis?

ABSTRACT: This study evaluated influence of addition of lead foil coupled to different types of digital receptors on image noise and on diagnosis of fractured instruments in teeth without and with root filling. Twenty-six molars had their root canals (n=67) cleaned and shaped and were divided into groups with and without root filling and with and without fractured instruments. Images were acquired in PSP and CMOS sensor, with and without addition of a lead foil coupled to the digital receptors. Diagnostic values were obtained by the area under the ROC curve, and one-way ANOVA compared the groups. Noise in images was measured by the standard deviation of mean gray values in images with and without the lead foil, and compared by two-way ANOVA (a=0.05). Addition of lead foil did not interfere in the diagnostic accuracy for both digital systems (p>0.05) and did not decrease noise in the images (p>0.05). However, independently of the addition of the lead foil, the phosphor-storage plate presented higher noise compared to the sensor (p ?0.05). Addition of lead foil to the digital receptor did not interfere in image noise and with the diagnostic accuracy for detecting fracured endodontic instrument in ex-vivo conditions.

RESUMEN: Este estudio evaluó la influencia de láminas de plomo acopladas a diferentes tipos de receptores digitales sobre el ruido de la imagen y el diagnóstico de instrumentos fracturados en dientes sin y con obturación radicular. Se limpiaron y moldearon 26 molares (n = 67), se dividieron en grupos con y sin relleno radicular y con y sin instrumentos fracturados. Las imágenes se adquirieron en el sensor PSP y CMOS, con y sin adición de una lámina de plomo acoplada a los receptores digitales. Los valores diagnósticos se obtuvieron por el área bajo la curva ROC y con ANOVA de una vía comparó los grupos. El ruido en las imágenes se midió mediante la desviación estándar de los valores medios de gris en las imágenes con y sin la lámina de plomo, y se comparó mediante ANOVA bidireccional (a = 0,05). La adición de lámina de plomo no interfirió en la precisión diagnóstica de ambos sistemas digitales (p> 0,05) y no disminuyó el ruido en las imágenes (p> 0,05). Sin embargo, independientemente de la adición de la lámina de plomo, la placa de almacenamiento de fósforo presentó mayor ruido en comparación con el sensor (p?0,05). La adición de lámina de plomo al receptor digital no interfirió con el ruido de la imagen y con la precisión diagnóstica para detectar el instrumento endodóntico fracturado en condiciones ex vivo.

Influence of different viewing conditions on the detection of fractured endodontic instruments using periapical radiographs at 3 projection angles.

OBJECTIVES: The objective of this study was to assess the influence of ambient lighting levels and horizontal viewing angle (HVA) on the radiographic detection of fractured endodontic instruments in root canals in extracted human mandibular molars. STUDY DESIGN: Thirty-two root canals were selected. Endodontic instrument fracture was induced in 24 canals, and all canals were endodontially treated. Periapical radiographs were obtained at orthoradial, mesioradial, and distoradial projection angles. Five oral radiologists examined the radiographs for detection of fractured endodontic instruments under 3 ambient lighting levels (high, 450 lux; medium, 28 lux; and low, 2.5 lux) and 3 HVAs (90°, 67.5°, and 45°). Area under the receiver operating characteristic curve (AUROC), accuracy, sensitivity, and specificity were calculated and compared by 2-way analysis of variance using Tukey post hoc tests (α = .05). RESULTS: AUROC data indicated that ambient lighting (P = .739) and HVA (P = .238) did not significantly influence the detection of fractured endodontic instruments. Overall mean diagnostic values were 0.745, 0.57, 0.46, and 0.90 for AUROC, accuracy, sensitivity, and specificity, respectively. CONCLUSIONS: The viewing conditions assessed in this study did not influence the radiographic detection of fractured endodontic instruments in root canals.

Artificial intelligence for detection of periapical lesions on intraoral radiographs: Comparison between convolutional neural networks and human observers.

OBJECTIVE: The aim of this study was to compare the diagnostic performance of convolutional neural networks (CNNs) with the performance of human observers for the detection of simulated periapical lesions on periapical radiographs. STUDY DESIGN: Ten sockets were prepared in bovine ribs. Periapical defects of 3 sizes were sequentially created. Periapical radiographs were acquired of each socket with no lesion and with each lesion size with a photostimulable storage phosphor system. Radiographs were evaluated with no filter and with 6 image filter settings. A CNN architecture was set up using Keras-TensorFlow. Separate CNNs were evaluated for randomly sampled training/validation data and for data split up by socket (5-fold cross-validation) and filter (7-fold cross-validation). CNN performance on validation data was compared with that of 3 oral radiologists for sensitivity, specificity, and area under the receiver operating characteristic curve (ROC-AUC). RESULTS: Using random sampling, the CNN showed perfect accuracy for the validation data. When data were split up by socket, the mean sensitivity, specificity, and ROC-AUC values were 0.79, 0.88, and 0.86, respectively; when split up by filter, they were 0.87, 0.98, and 0.93, respectively. For radiologists, the values were 0.58, 0.83, and 0.75, respectively. CONCLUSIONS: CNNs show promise in periapical lesion detection. The pretrained CNN model yielded in this study can be used for further training on larger samples and/or clinical radiographs.

Influence of the file format and transmission app on the radiographic diagnosis of caries lesions.

OBJECTIVES: This in vitro study aimed to evaluate the influence of the radiographic image file format and the transmission application (app) on the diagnosis of proximal caries lesions. STUDY DESIGN: Twenty bitewing radiographs of 40 posterior human teeth placed in phantoms were acquired using the Digora Toto digital sensor. All images were exported as TIFF (Tagged Image File Format), BMP (Windows Bitmap), PNG (Portable Network Graphics), and JPEG (Joint Photographic Experts Group) and transmitted online via WhatsApp and Messenger. Five examiners evaluated the radiographs with no online transmission and as transmitted through the 2 apps for the presence of proximal caries lesions using a 5-point scale. The reference standard for caries lesions was established using micro-computed tomography. Two-way analysis of variance compared values of sensitivity, specificity, accuracy, and area under the receiver operating characteristic curve (α = .05). The kappa test was used to assess intra- and interexaminer agreement. RESULTS: Sensitivity, specificity, accuracy, and area under the receiver operating characteristic curve values showed no significant differences in the diagnosis of proximal caries lesions between the different image file formats (P ≥ .773) and transmission apps (P ≥ .608). Intraexaminer agreement was substantial (κ = 0.742) and interexaminer agreement was moderate (κ = 0.475). CONCLUSION: The digital file format and transmission app did not influence the radiographic diagnosis of proximal caries lesions.

Do image enhancement filters in complementary metal oxide semiconductor and photostimulable phosphor imaging systems improve the detection of fractured endodontic instruments in periapical radiography?

OBJECTIVE: The aim of this study was to evaluate the influence of image enhancement filters on detection of fractured endodontic instruments and on image noise and pixel intensity. STUDY DESIGN: In total, 26 mandibular molars (68 root canals), divided into 4 groups (presence/absence of root canal filling, and presence/absence of a fractured endodontic instrument) were radiographed by using a complementary metal oxide semiconductor (CMOS) and a photostimulable phosphor (PSP) system. Images with 4 enhancement filters (Sharpen UM, Edges All, BC Low, and BC High) were compared with nonfiltered images. The area under the receiver operating characteristic curve (Az), sensitivity, and specificity in detection of fractured instruments were compared for each imaging condition. Means and standard deviations (SD) to measure noise and changes in pixel intensity were calculated. Analysis of variance was used to analyze the data. RESULTS: There were no significant differences in Az, sensitivity, and specificity values between nonfiltered and filtered images in detection of instruments in root canals without and with root canal filling (P ≥ .360). SD was reduced by filters in CMOS but not PSP radiographs. Sharpen UM caused more changes in the mean values in both systems. CONCLUSIONS: Filters did not improve diagnostic performance in detecting instruments. Noise and pixel intensity were affected differently.

Influence of reconstruction parameters of micro-computed tomography on the analysis of bone mineral density.

PURPOSE: This study was conducted evaluate the influence of reconstruction parameters of micro-computed tomography (micro-CT) images on bone mineral density (BMD) analyses. MATERIALS AND METHODS: The sample consisted of micro-CT images of the maxillae of 5 Wistar rats, acquired using a SkyScan 1174 unit (Bruker, Kontich, Belgium). Each acquisition was reconstructed following the manufacturer's recommendations (standard protocol; SP) for the application of artifact correction tools (beam hardening correction [BHC], 45%; smoothing filter, degree 2; and ring artifact correction [RAC], level 5). Additionally, images were reconstructed with 36 protocols combining different settings of artifact correction tools (P0 to P35). BMD analysis was performed for each reconstructed image. The BMD values obtained for each protocol were compared to those obtained using the SP through repeated-measures analysis of variance with the Dunnett post hoc test (α=0.05). RESULTS: The BMD values obtained from all protocols that used a BHC of 45% did not significantly differ from those obtained using the SP (P>0.05). The other protocols all yielded significantly different BMD values from the SP (P<0.05). The smoothing and RAC tools did not affect BMD values. CONCLUSION: BMD values measured on micro-CT images were influenced by the BHC level. Higher levels of BHC induced higher values of BMD.

Accuracy of ITK-SNAP software for 3D analysis of a non-regular topography structure.

OBJECTIVES: To evaluate the accuracy of ITK-SNAP software for measuring volumes of a non-regular shape structure, using cone beam computed tomography (CBCT) scans, besides for developing a mathematical model to correct the software measurement error in case it existed. METHODS: A phantom made by moulding a rubber duck's head was filled with total (38,000 mm3) and partial volumes of water (7000 mm3, 14,000 mm3, 21,000 mm3, 28,000 mm3 and 35,000 mm3), which constituted the gold standards. The sound phantom and the phantom filled with different volumes of water were scanned in a Picasso Trio CBCT unit set at 80 kVp, 3.7 mA, 0.2 mm3 voxel and 12 × 8.5 cm field of view. Semi-automatic segmentation was performed with ITK-SNAP 3.0 software by two trained oral radiologists. Linear regression analyzed the relation between ITK-SNAP calculated volumes and the gold standard. Intraclass correlation coefficient was applied to analyze the reproducibility of the method. Significance level was set at 5%. RESULTS: Linear regression analysis showed a significant relationship between ITK-SNAP volumes and the gold standard (F = 22,537.3, p < 0.0001), with an R2 of 0.9993. The average error found was 4.7 (± 4.3) %. To minimize this error, a mathematical model was developed and provided a reduction of it. ICC revealed excellent intra-examiner agreements for both examiners 1 (ICC = 0.9991, p < 0.0001) and 2 (ICC = 0.9989, p < 0.0001). Likewise, inter-examiner agreement was excellent (ICC = 0.9991, p < 0.0001). CONCLUSION: The software showed to be accurate for evaluating non-regular shape structures. The mathematical model developed reduced an already small error on the software's measurements.